Product configurator

Explanations for the configurator:

1. Product code

2. Orientation: The orientation of the sheet depends on how it is positioned (e.g., a gate is usually vertical because it is taller than it is wide, panels in walls are usually wider than tall, so horizontal).

3. Shape: The sheet shape depends on your requirements. Parallelogram is a standard rectangular shape, trapezoid has slanted sides.

4. Maximum sheet size is 1.500 m x 3.000 m.We recommend reducing the width and height of the sheet by 2mm.

5. Sheet metal installation
- Without bend: Standard flat sheet
- Welding into frame: Sheet is welded into a steel frame (20€ surcharge)
- Edge bending 20mm: Edges are bent by 20mm (20€ surcharge)
- Frameless part: Suitable between steel posts or walls with mounting and drainage holes (50€ surcharge)

6. Holes are suitable for riveting with 4mm rivets.

7. Pattern size: Large pattern is standard size, Medium is reduced for more detail, Small is even more detailed for smaller applications (e.g., ventilation grilles).

8. Material:
- Steel thickness 2mm
- Galvanized steel thickness 2mm, galvanized before cutting
- Stainless steel thickness 2mm, one side brushed with foil, other side untreated
- Aluminum thickness 3mm, backside must be ground after cutting
- Corten thickness 2mm, not pre-rusted (no corrosion), must be left to rust naturally
- After cutting, burrs may remain that need grinding. Burr removal is not included in the price. This mostly happens with aluminum.
- We recommend sandblasting and powder coating steel, zinc, and aluminum surfaces.

9. Edges without pattern:
Specify the width of edges without pattern in millimeters. This does not affect the price. Edges without pattern are used for mounting or aesthetic purposes.